Building materials
Wood/Wood composites
  Beams, columns, lintels
Particle composites
Fibre composites
Laminates
Planed wood
Wood flooring and parquet
Other
  Insulation
Lining materials
Foils/Barriers/ membranes
Façade solutions
Further information
  Explanation of Data sheets - support information
       


Data sheet (pdf, 81KB)


print version

    Wood flooring and parquet - Wood strip flooring

Solid wood elements with groove and/or tongue are solidwood strips of soft- or hardwood with a thickness (t) ≥ 14 mm, which at one longitudinal side and at one width side are provided with a groove each and at the respectively opposite side with a planed tongue each.The type of wood is selected - depending on the requirements of use in the structure - and must be stated. Sorting is undertaken into the three appearance classes ⚪, △ and ◻. According to the national preface of EN 13226, for Austria, the free sorting "exquisite" (for oak, ash and beech) is used for determination of the sorting determination. However - depending on the manufacturer - further free sortings (classes) are also possible. The fire behaviour of the parquet is classified acc. to the classification report of the manufacturer or acc. to EN 13501-1, resp. (Cfl-s1, Dfl-s1, Efl - acc. to product details and end-use condition). The CE marking of wood flooring and parquet acc. to EN 14342 has been compulsory since 01.03.2010.
   
       
  Details of sustainability rating (Basis: tdry mass)

Solid wood parquet, hardwood 10 mm

OI3 GWP
[kg CO2 Äqv.]
AP
[kg SO2 Äqv.]
PEI ne
[MJ]
PEI e
[MJ]
EP
[kg PO4 Äqv.]
POCP
[kg C2H4 Äqv.]
1.252,0 65,2 5,1 17.768,2 25.373,6 2,1 0,8


     
 
Manufacturer according to EN 14342
 
Product Manufacturer
Bawart Massiv Parkett J.C.Bawart & Söhne GmbH & Co KG DoP (pdf, 30KB)