Building materials
Wood/Wood composites
  Beams, columns, lintels
Particle composites
Fibre composites
Laminates
Planed wood
Wood flooring and parquet
Other
  Insulation
Lining materials
Foils/Barriers/ membranes
Façade solutions
Further information
  Explanation of Data sheets - support information
       


Data sheet (pdf, 755KB)


print version

    Wood flooring and parquet - Multi-layer parquet

Multi-layer parquet elements (according to EN 13489) are elements consisting of a wear layer of solid wood with a thickness of at least ≥ 2.5 mm and one or several support layers of wood or wood composites, which are glued with one another. Predominantly 2-layer parquets (wear layer and support layer) and 3-layer parquets (3-layered setup) are manufactured. For the wear layer, the types of wood oak, common beech, ash, spruce and larch are predominantly used in Austria. Multi-layer parquet elements comprise the types of parquet prefabricated and panel parquet as well as parquet boards and are predominantly finished at the factory. Sorting is undertaken into the three appearance classes ⚪, △ and ◻. However - depending on the manufacturer - further free sortings (classes) are also possible. The fire behaviour of the parquet is classified acc. to the classification report of the manufacturer or acc. to EN 13501-1, resp. (Cfl-s1, Dfl-s1, Efl - acc. to product details and end-use condition). The CE marking of wood flooring and parquet acc. to EN 14342 has been compulsory since 01.03.2010.
   
       
  Details of sustainability rating (Basis: tdry mass)

Multi-layer parquet, wear layer: hardwood, support layer: softwood

OI3 GWP
[kg CO2 Äqv.]
AP
[kg SO2 Äqv.]
PEI ne
[MJ]
PEI e
[MJ]
EP
[kg PO4 Äqv.]
POCP
[kg C2H4 Äqv.]
1.345,0 348,0 5,6 17.194,1 18.932,6 2,3 0,8


     
 
Manufacturer according to EN 14342
 
Product Manufacturer
Bawart 3schicht Dielen J.C.Bawart & Söhne GmbH & Co KG DoP (pdf, 120KB)