Building materials
Wood/Wood composites
  Beams, columns, lintels
Particle composites
Fibre composites
Laminates
Planed wood
Wood flooring and parquet
Other
  Insulation
Lining materials
Foils/Barriers/ membranes
Façade solutions
Further information
  Explanation of Data sheets - support information
       


Data sheet (pdf, 128KB)


print version

    Planed wood - Planed goods

Profiled timber and mouldings which measure 9,5 to 40 mm in thickness are referred to as "planed goods". These non-structural products are manufactured by sawing or machining softwood or hardwood lumber in a sawmill followed by kiln-drying and planning. These machined profiles are intended for use in interior and exterior applications. A distinction is made between machined profiles with or without tongue and groove profiles. Durability against biological attack of the machined profiles varies depending on the natural durability of wood species utilized. In order to increase its durability the wood may be preventatively treated with a wood preservative. A surface treatment is often applied in order to protect the wood surface from weathering and mechanical damage. Such surface treatment can be varnishes or coatings which are available in different colours. The CE marking of solid wood panelling and cladding acc. to EN 14915:2013 and solid wood flooring acc. to EN 14342:2013 has been compulsory since 08.08.2015.
   
       
  Details of sustainability rating (Basis: tdry mass)

Larch, planed

OI3 GWP
[kg CO2 Äqv.]
AP
[kg SO2 Äqv.]
PEI ne
[MJ]
PEI e
[MJ]
EP
[kg PO4 Äqv.]
POCP
[kg C2H4 Äqv.]
89,2 -1.139,7 1,6 3.063,5 16.666,7 0,3 0,5

Spruce, planed

OI3 GWP
[kg CO2 Äqv.]
AP
[kg SO2 Äqv.]
PEI ne
[MJ]
PEI e
[MJ]
EP
[kg PO4 Äqv.]
POCP
[kg C2H4 Äqv.]
133,0 -1.436,0 2,1 3.860,0 21.000,0 0,4 0,4


     
 
Manufacterer according to VEH Richtlinie (Verband der Europäischen Hobelindustrie) resp. EN 13990, EN 14519, EN 15146
 
Product Manufacturer
Hobelwaren Hasslacher Norica Timber DoP (pdf, 1870KB)